When installing the MiX Vision AI Standalone solution you can use the MiX Vision device as an onboard computer, meaning the device will be able to read position and trip data as well as create and record events such as harsh braking, harsh cornering, over speeding, etc.
Commissioning process
- Make the Streamax Standalone mobile device available in the mobile device library.
- Make the Streamax (Standalone) peripheral device available in the peripheral library.
- Connect the peripheral to the SP line on the Streamax Standalone mobile device using the relevant mobile device template. (Default mobile device template for Streamax Standalone)
- A new default configuration group for MiX Vision standalone assets will now be made available. When creating new assets or editing existing assets, ensure that the assets commissioned with the Streamax Standalone device are in the correct configuration group.
- Make sure the mobile device template and event template for Streamax standalone is used in this configuration group (Default mobile device template for Streamax Standalone and Default event template for Streamax Standalone).
- After commissioning the MiX Vision standalone device, you need to set the initial odometer reading. Do this by opening the mobile device settings page of the asset.
Please note
When the MiX Vision AI is set up to be used as the onboard computer (OBC) the system will ignore the MiX Fleet Manager thresholds for the OBC events (harsh braking, harsh acceleration, over speeding, etc.) and the logic that will trigger the events will purely be based on what is configured on the device.