Setting up VisionAI device as a peripheral

1. Make the mobile device, e.g. MiX 4000, MiX 6000 available in the mobile device library.
2. Make the VisionAI camera peripheral available in the peripheral library.
3. Connect the VisionAI peripheral to the mobile device using the mobile device template.
4. Create a configuration group.
5. Enable VisionAI events or record OBC events and add them to an Event template. 
6. Remember to choose this configuration group when creating your asset or editing your asset. 
7. Enter the VisionAI serial number on the mobile device settings page when commissioning your asset. 
8. Compile and upload config (note this step is not necessary when using the VisionAI standalone device, i.e. as an onboard computer).

 You can also use the VisionAI device as an on-board computer. Click here to read how to set this up.