Battery - Edit Data

Identifying Information

• The first section of the Battery detail screen contains general identifying information.
• The following information can be edited in this section:
• Battery Stencil – This is the battery name.  Each battery’s name is a required field used to identify the battery on interface screens and reports.
• BMID Number – This is the programmed ID on the battery-mounted monitoring device (if applicable).
• Battery In Service – This is a checkbox, visible only in add or edit mode, for indicating the battery is in service.

Battery Status

• The second section of the Battery detail screen contains Battery Status data, including the following fields.
• Status – Indicates whether the battery is in service
• BSOC – Battery State of Charge indicates the level of charge the battery had at last communication
• Installed on – Indicates the last known vehicle the battery was installed on

​

• These fields are not editable.

General Profile

• The third section of the Battery detail screen contains General Profile data.  To edit this information, click on the “Edit” button on the bottom right of the screen.
• The following information can be edited in this section:
• Serial Number – This is a text field for entering the battery’s serial number
• Purchase Date – Use the calendar icon to select the date the battery was purchased
• Date in Service – Use the calendar icon to select the date the battery was put into service

Model

• The third section of the Battery detail screen contains data on the battery model, including the following fields:
• Battery Type –  Liquid, gel, etc.
• Voltage Rating – Nominal voltage of the battery (12VDC, 24VDC, etc.)
• Number of Cells – The number of cells within the battery
• Charge Cycle
• These fields are not editable.