Battery - Battery Detail Screen

This Help section covers the elements of the Battery Detail Screen.

Battery - Battery Search

• On the left side of the battery profile screen you will see a battery list and search bar that allows you to move to another battery record without going back to the Battery List. Click on any name to open that battery record.
• You can also use the search bar to find a battery.  Note that at least 3 characters must be entered for the search filter to engage and find a battery.

Battery - Options: Go Back, Add, Duplicate, Edit

• In the bottom right of the screen are buttons for working with the battery detail screen.

• The “Go Back” link will take you back to the Battery List screen.

• The “Add” button allows you to add a new record.
• The “Duplicate” button allows you to add a new record by duplicating the current record that is open.
• The “Edit” button allows you to edit the current record.

Battery - Expand/Collapse Sections

• Sections within the battery detail screen can be expanded or collapsed using the arrows on the right side of the section header bars.
• Note:  If an update has been made to any properties or settings included in a collapsed section, those changes will still take effect if the battery is saved.

Battery - Battery Data

Identifying Information

• The first section of the Battery detail screen contains general identifying information.  To edit this information, click on the “Edit” button on the bottom right of the screen.
• The following information can be edited in this section:
• Battery Stencil – This is the battery name.  Each battery’s name is a required field used to identify the battery on interface screens and reports.
• BMID Number – This is the programmed ID on the battery-mounted monitoring device (if applicable).
• Battery In Service – This is a checkbox, visible only in add or edit mode, for indicating the battery is in service.

Battery Status

• The second section of the Battery detail screen contains Battery Status data, including the following fields.
• Status – Indicates whether the battery is in service
• BSOC – Battery State of Charge indicates the level of charge the battery had at last communication
• Installed on – Indicates the last known vehicle the battery was installed on

​

• These fields are not editable.
• Additionally, this section contains two action buttons:
• Run Health Report – Produces the battery health report indicating the last known statistics on the battery
• Refresh Status – select this button to refresh the battery status data on screen

General Profile

• The third section of the Battery detail screen contains General Profile data.  To edit this information, click on the “Edit” button on the bottom right of the screen.
• The following information can be edited in this section:
• Serial Number – This is a text field for entering the battery’s serial number
• Purchase Date – Use the calendar icon to select the date the battery was purchased
• Date in Service – Use the calendar icon to select the date the battery was put into service

Model

• The third section of the Battery detail screen contains data on the battery model, including the following fields:
• Battery Type –  Liquid, gel, etc.
• Voltage Rating – Nominal voltage of the battery (12VDC, 24VDC, etc.)
• Number of Cells – The number of cells within the battery
• Charge Cycle
• These fields are not editable.