Skip to main content
Employee Sign in

how-to-disable-or-enable-hard-coded-user

Marisa Potgieter
  1. Log on to the Vision software
  2. Select the System Configuration Tab
  3. Select the WAM Admin Tab
  4. Click on the {System- Wide} drop down arrow
  5. Click on System Wide
  6. Click on Get Beacon Button
  7. Click OK on the Retrieve Global Beacon Window
  8. Click on Config Beacon button
  9. Scroll down to select byte 17.0
  10. To Enable hard coded users- change byte 17 to 0
  11. To Disable hard coded users- change byte 17 to 1
  12. Click on the Apply button
  13. Click on Yes button
  14. Clcik on Set Beacon button
  15. Click OK
  16. Done

Related articles