These devices must be configured using the vendor-supported tools:
https://ruptela.com/device-center-gps-tracker-configuration/
These devices do not receive CAN data but will be wired to the vehicle for power. The odometer value must be entered during configuration, after which it will automatically increase based on GPS movement.
Devices must be configured to point to the On-Road IoT designated endpoint for the desired environment (Flespi).
- Configure the device to communicate to this endpoint: ch1295291.flespi.gw:33697
- Make the device available.
- Set up Ruptela device to use the correct configuration group and select the correct mobile device type
Product details can be found on the vendor website here: