MiX Vision - Firmware Release
We are pleased to announce a new firmware release for MiX Vision. The firmware is compatible with all the current hardware models namely the MVR1004, MVR1204 and MVR2214. This release is a maintenance release and does not include any new features when compared to the previous release (mix1001d5).
The fixes and changes in this release address the following issues:
- The daylight savings time offset on the video overlay
- SD cards that hangs and only recover with a power cycle
CSO and Cathexis will manage and perform the upgrade over-the-air for all the live units on all data centers. The roll-out will be phased in over a period and will start with only a few units on every server and only once we have confidence that all is well, it will be applied to all live units.
Installation Instructions:
- For units that are already installed and reporting in; you don't have to do anything. CSO and Cathexis will schedule a small patch to minimize the impact on communication cost.
- For bench units, new units or units not reporting in; please download the installation utility and firmware from the links below and install it via the Ethernet connection.
- Once the firmware has been uploaded, it should display the following version number: "mix1001d6" on the MiX Vision support tool.
Firmware Links:
I will send out an initial status update to the technical people in each RSO when we start the roll-out and again when more than 80% of the units has been loaded with the patch.
Please do not hesitate to contact me directly if you need any assistance.
Kind regards,
Izak Nel
Product Manager
Tel : +27 21 880 6703
Email : izak.nel@mixtelematics.com