Advanced commands allow fleet managers to remotely execute device-level operations on Cellocator CR100 and CANiQ-M devices from the Live tracking page. These commands are separate from standard commands to mobile devices and are only available for assets commissioned with a supported device.
The following advanced commands are supported:
- Reboot – Remotely reboot the device.
- Connect to C+ – Force the device to connect to the Cellocator Plus configuration server.
- Connect to C+ (CAN Mode) – Force the device to connect to the Cellocator Plus configuration server and download a new CAN script file.
- Auto-baud rate Reset – Reset the automatic baud rate on the device.
Send an advanced command
- Click Monitor.
- Under Tracking, click Live tracking.
- Make sure the Assets tab is selected.
- Click the three-dot menu at the end of the relevant asset row.
- Click Advanced commands to mobile device.
• Select the required command from the list.
• Click Send.
Please note that the Advanced commands menu item is only available for assets commissioned with a Cellocator CR100 or CANiQ-M device.
Requirements
• A Cellocator CR100 or CANiQ-M device provisioned and commissioned on your Unity On-Road IoT organisation.
• The device must be reporting positions and online in Live Tracking before sending advanced commands.
• Appropriate user permissions to send advanced commands in Unity MX.
TIP: Set up a stream in the Info Hub to track advanced commands sent to devices and monitor command delivery and acknowledgement status.
Use Cellocator Plus to confirm that the device has checked in after sending a Connect to C+ or Connect to C+ (CAN Mode) command.
RECOMMENDED READING
CR100 and CR400 – Getting Started