aaa-impact-sensing

AAA Impact sensing:

1. When adding vehicles to the Vision DB, the initial setting can be anything as long as it’s not left at 10/10/255.  I’ll use .5 / .5 / 5 , that’s what the Auto set event sets them too.
2. The Impact Training Enabled box under the vehicles Advanced Settings in Access Control  MUST need to be checked as it’s not used.
3. The Auto Impact Adjust Event can MUST be disabled.
4. AAA should not have the Auto Impact Adjust running.
5. The Impact Training Enabled box will re-Enable itself if the Auto Impact Adjust event is active and runs.