These devices must be configured using the Cellocator Programmer tool, pointing to the correct endpoint for On-Road IoT.
Note - this is an asset tracking device with a rechargeable battery that is typically connected with power and optionally, ignition.
The device may be configured to use accelerometer for motion/trip start detection.
The odometer value must be entered during configuration, after which it will automatically increase based on GPS movement.
-
Configure the device to communicate with the Cellocator gateway.
You have to sign in as a Powerfleet staff member to view this article.
- Make the device available.
- Set up the LV300 device to use the correct configuration group.