The Record Trip Driver Picture event is a default event that is triggered at the start of a trip. The event takes a snapshot image using the in-cab driver-facing camera.
The image can be viewed in Historical tracking by clicking on the camera icon.
| Using On-Road IOT | Using Unity Portal |
|---|---|
| Click Monitor. | Click Visibility |
| Under Activity timeline, select Trip timeline. | Click Trip timeline |
- When choosing events, remember to include the Record Trip Driver Picture.
- Make sure the Assets tab is selected.
- Expand the trip to view any sub-trips or events that it may contain.
A camera or video icon in the Events column will indicate if media files are available.
- Keep on expanding the row until you get to the relevant event, then click on the image or video icon to view the media file.
- The driver snapshot info window will open and display information about the asset, driver, and trip.
- For the VisionAI multiple camera solution (Streamax camera) the driver picture event will be recorded on the in-cab camera, or channel 1 if custom camera names were chosen, by default. You can however choose another camera.
The existing default event for the driver snapshot will trigger as a notification event when the VisionAI device is connected to the asset.
Conditions for driver picture to be triggered:
- The asset must be performing a trip (i.e. be in trip).
- There must be video recorded and available for that time.
- The DVR Ignition On Timer must be more than 120 seconds (2 minutes).
- The speed must be more than the configured moving speed.
The Record trip driver picture feature can be disabled at the organization level or per Mobile Device Template. See Disable the recording of trip driver picture and Enable or disable trip driver picture on a mobile device template
RECOMMEND READING
View photo or video events in Historical Tracking